Sansui TVM1300 13 inch TV - Set Auto Channel does not work. I go into the Menu and start Auto Channel and it does not find any channels. Yet I can manually enter the channel number and it will go to that channel. Also, Channel UP/DOWN goes thru a list of favourites. Is there a way to RESET the list to include all channels? I can use a MENU function but that will be tedious to Add EACH channel. This Sansui model is lost without its remote control so don't every lose the remote control.
May 19, 2017
★ ★ ★ ★ ☆
Product Troubleshooting for SansuiS3275 TV
Tips for a great answer:
- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Sounds like AFT, AGC voltages are not proper. Contact any service technician. The main board of your TV has to be troubleshooted.
If the main system control memory IC is bad, this kind of fault can occur. This is a very small IC; have 8 solder terminals, and can be located very near to the main system control-chroma IC. Check and replace it. Be sure to replace it with the same number printed on it; in all respect. Otherwise, it won't go. http://electronicshelponline.blogspot.com/ Before replacing it, try a reset to this set, and then check.
There are two methods to reset TVs. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight is better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; check the site linked here.