PV-V4021 S-VHS VCR

PV-V4021 S-VHS VCR

Cassette loading process won't complete

When I insert the cassette, the carriage retracts backward into drop position but then fails to drop and the cassette door never closes. There are no discernable clicking sounds or other unusual noises. The VCR then spits the tape back out.

★ ★ ★ ★ ☆ 4.0 stars

PV-V4021 S-VHS VCR

Product Troubleshooting for PV-V4021 S-VHS VCR


Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Answers :


This is a problem with the process called 'tape loading' - pulling the tape loop out of the cassette and wrapping it around the spinning video drum, engaging the capstan and pinch roller and reel rotation. If you're NOT still under warrantee you should at least open the VCR and Check all the belts above and below the deck. Belts can appear to be firm but if they do not return immediately to their relaxed length when you stretch them 25%, they will need to be replaced. With the cover off, observe the behavior when you hit play. (You may need to put a piece of cardboard over the cassette to block external light from interfering with the start/end tape sensors). Assuming this is a basic VCR (no instant start features), you should see: 1. The video head drum begins to spin. 2. the roller guides move smoothly on the tracks, wind the tape around the drum, and stop snuggly pressed against the 'V-stopper' at the end of the tracks. 3. The pinch roller moves into position and presses the tape against the capstan. 4. The tape begins to move and is wound up by the takeup reel. 5. The picture and sound appear on the TV. With a 'rapid or quick start' (or it may be called something else) transport, the tape moves to a half-loaded position when the cassette is inserted. This is at an intermediate position partially pulled out of the cassette but not wrapped around the drum. On VCRs with a real-time counter and/or index search capabilities, the tape will be in contact with the control head. With an 'instant start' transport, the tape will fully load around the spinning drum when the cassette is inserted but the capstan will not engage and no tension will be applied to the tape until you press PLAY or REC. (After about 5 minutes, the drum will stop and it may unload to the half loaded or unloaded position.) Note that for VCRs with a real-time counter and/or index search capabilities, the tape must be in contact with the control head (but not the video heads) for all relevant modes. These VCRs (which include many modern units) must therefore pull the tape at least partly out of the cassette. In all cases, the completion of the sequence results in approximately the same mechanical configuration during PLAY.

Research, Knowledge and Information :


How to Troubleshoot a VCR That Won't Accept Video Cassettes ...


How to Troubleshoot a VCR That Won't ... The cassette loading ... These objects can jam belts and mechanisms making it impossible for the VCR to complete ...
Read More At : www.techwalla.com...

Notes on the Troubleshooting and Repair of Video Cassette ...


Notes on the Troubleshooting and Repair of Video Cassette Recorders ... it won't last. ... , the loading process may stop half way, ...
Read More At : www.repairfaq.org...

Why my Canon Elura 60 camcorder won't let me load the mini DV ...


Why my Canon Elura 60 camcorder won't let me load the mini DV cassette? ... altho' it will connect to the Quicktime web page it does not complete the loading process.
Read More At : www.deskdr.com...

Oberheim Matrix 12/Xpander Cassette or WAV File Loading ...


Oberheim Matrix-12 & Xpander Cassette or WAV File Load/Save Instructions. ... (won't affect the ... You can abort the cassette process at any time by pressing the ...
Read More At : www.kidnepro.com...

Troubleshooting a Philips vcr - How to remove a stuck cassette


May 19, 2011 · ... there was a vhs cassette stuck inside that won't came out. ... Troubleshooting a Philips vcr - How to remove a stuck ... Loading more suggestions ...

Notes on the Troubleshooting and Repair of Video Cassette ...


The video cassette recorder is a wonderful example ... This site includes a relatively short but fairly complete VCR repair guide ... , the loading process may ...
Read More At : www.repairfaq.org...

Cassette Deck Troubleshooting - Questions about Cassette ...


What can cause a Sony dual cassette deck to have a grating mechanical sound after loading a cassette ... the cassette. The other side won't ... step process including ...
Read More At : www.justanswer.com...

How to Load Cash in an ATM Machine - Prineta


How to Load Cash in an ATM Machine. ... but this guide specifically details the process for loading ATMs ... Machines that aren’t as busy won’t need to be ...
Read More At : prineta.com...

Having problems with your PV-V4021 S-VHS VCR ?

Loading ...

Load time: 0.0356 seconds