The unit will fast forward and rewind, but won't play

My VCR won't play. The unit mounts the tape properly, and will fast forward and rewind, but won't play. Let me know if you have any suggestions. Thanks

★ ★ ★ ★ ☆ 4.0 stars


Product Troubleshooting for VC-H810U VHS VCR

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Answers :

This is a problem with the process called 'tape loading' - pulling the tape loop out of the cassette and wrapping it around the spinning video drum, engaging the capstan and pinch roller and reel rotation. Check all the belts above and below the deck. Belts can appear to be firm but if they do not return immediately to their relaxed length when you stretch them 25%, they will need to be replaced. With the cover off, observe the behavior when you hit play. (You may need to put a piece of cardboard over the cassette to block external light from interfering with the start/end tape sensors). Assuming this is a basic VCR (no instant start features), you should see: 1. The video head drum begins to spin. 2. the roller guides move smoothly on the tracks, wind the tape around the drum, and stop snuggly pressed against the 'V-stopper' at the end of the tracks. 3. The pinch roller moves into position and presses the tape against the capstan. 4. The tape begins to move and is wound up by the takeup reel. 5. The picture and sound appear on the TV. With a 'rapid or quick start' (or it may be called something else) transport, the tape moves to a half-loaded position when the cassette is inserted. This is at an intermediate position partially pulled out of the cassette but not wrapped around the drum. On VCRs with a real-time counter and/or index search capabilities, the tape will be in contact with the control head. With an 'instant start' transport, the tape will fully load around the spinning drum when the cassette is inserted but the capstan will not engage and no tension will be applied to the tape until you press PLAY or REC. (After about 5 minutes, the drum will stop and it may unload to the half loaded or unloaded position.) Note that for VCRs with a real-time counter and/or index search capabilities, the tape must be in contact with the control head (but not the video heads) for all relevant modes. These VCRs (which include many modern units) must therefore pull the tape at least partly out of the cassette. In all cases, the completion of the sequence results in approximately the same mechanical configuration during PLAY. Several likely possibilities when it shuts down: 1. Everything occurs as above, picture and sound appear for a few seconds, but then the VCR unloads the tape, ejects the cassette, goes into REW mode, stops, or shuts off. Two common causes: The takeup reel does not turn and tape spills into the machine. This is sensed by the microcontroller which aborts record or play and attempts to save your valuable cassette. Most likely cause: old/dirty idler tire. As a test, turn the idler tire inside-out. The fresh surface will now work well enough to confirm this diagnosis and will continue working long enough for your replacement idler tire to arrive. See the section: "General guide to VCR cleaning and rubber parts replacement". The takeup reel is turning properly but
You **** **** thats your problem

Research, Knowledge and Information :

New Problem ! 3510 won't play, fast forward or ... | Shaw Support

New Problem ! 3510 won't play, fast forward or rewind after pause. ... and get rid of everything else on this unit. ... rewind, or fast forward,, ...
Read More At :

JVC BR-8600U won't play tape, fast forward, rewind ...

JVC BR-8600U won't play tape, fast forward, rewind ... them and fast-forward. I don't have the unit. ... 2002-2017 The Digital FAQ ยท Hosted by ...
Read More At :

I cant fast forward a dailymotion video , what can i do? - I ...

I cant fast forward a ... "Unit and after resetting in play ... I have just bought a toshiba sd2010ky dvd player and movie on usb stick won`t fast forward or rewind?
Read More At :

I have a Sony TC-RX79 Cassette Deck that wont play. It rewinds,

No it doesn't move except in Rewind or Fast Forward. ... I have to visually be next to the unit to ... This machine doesn't do that. If you call the forward play ...
Read More At :

AIWA Dual cassette deck powers on but wont play tapes/fast

AIWA Dual cassette deck powers on but wont play tapes/fast ... deck powers on but won't play tapes/fast forward/rewind. ... to the innards of your unit, ...
Read More At :

Sony SLV-686HF won't rewind | Electronics Forums

Sony SLV-686HF won't rewind. ... Reverse scan during playback doesn't work either. Fast forward ... but I didn't notice any lateral play in the capstan so I didn't ...
Read More At :

Teac 6010 won't play but will fast forward and fast rewind ...

Teac 6010 won't play but will fast forward and fast rewind.
Read More At :

What's wrong with my VCR? It won't do anything. - VideoHelp Forum

It won't do anything; play, fast forward or rewind. ... Are you looking at figure 2-13 "mode position unit" on page 8? ... VHS-C won't play in VCR.
Read More At :

Having problems with your VC-H810U VHS VCR ?

Loading ...

Load time: 0.0220 seconds