RED SHADOW AROUND IMAGES of SONY KP-57WS510 RPCRT
My SONY KP-57WS510 RP TV has developed a red and blue shadows around the images. I love my this TV. I tried to adjust the convergence per the manual, but the red crosses does not move even move a micro millimeter. I have used the toggle button to have the red box around the cross to move. It does not move at all. Any kind of help will be highly appreciated.
Thank you in anticipation
★ ★ ★ ★ ☆
Product Troubleshooting for KP-57WS510 57" Rear Projection HDTV
Tips for a great answer:
- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Your set uses two STK392-560 convergence ICs they are attached to a large heat sink on the D board. You can save your self about 400 for a twenty minute repair by getting new ICs at the following link as trhey provide free instalation instructions with pics so you can do the job yourself. It only requires basic soldering skills I would order about six 4.7ohm 1/2 watt resistors as well just in case you need them asusually sonys' will burn one or two of the 4.7ohm convergence resistors when the ICs fail. Heres the link
I HV A SONY PROJECTION TV. WHEN I SWITCH IT ON IT GETS OFF AUTOMATICALLY AFTER FRACTION OF A SECOND. PLS SUGGEST SOME REPAIR MEASURES OR AT LEAST GIV ME A SONY SERVICE TEL NO. IN THANE