WS-55859 55" Rear Projection Television

WS-55859 55

I have an orange wavey line in the top of the picture and words are double and two different colors.

Posted by john875 on Oct 03, 2009

★ ★ ★ ★ ☆ 4.0 stars

WS-55859 55

Product Troubleshooting for WS-55859 55" Rear Projection Television


Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Answers :


WS-55859 uses a single STK-393-110 convergence IC--if convergence is out and will not adjust--the IC and any resistors around it (that are bad) need to be replaced and the set adjusted.This is very common---I have repaired hundreds of these sets---you have two choices---If you can do the repair yourself you can buy the chip on Ebay for about 14 dollars plus shipping. I have detailed instructions for this repair but I am not permitted to post MY email here.If you cannot do this repair yourself--shop around your area---most shops charge 300-400 for this repair----if they say it has to go to the shop--keep looking as any good tech can do this repair in your home in about 1 hour.I have done hundreds of these sets and here I charge 200-250 total in the customer's home......If you have any questions or need advice reply to this posting here and I will assist you. You can search here for all my posts concerning this type of repair on sets just like yours---Regards, SD TECH
Having problems with your WS-55859 55" Rear Projection Television ?

Loading ...

Load time: 0.0081 seconds